Research Energy of Ohio Inc.

200 East Bluegrass Dr      Norwalk, Ohio 44857

Phone: 419-660-8832      Fax: 419-660-8833

E-Mail: sales@researchenergy.com   Web: www.researchenergy.com

ACCESSORIES FOR SEQUENTIAL BLASTING MACHINES

 

EC15-2, EC15-10, EC15-250, EC15-300, and EC15-500 Extension Cables are available in 2 ft. (0.6 m.), 10 ft (3.0 m.), 250 ft. (76.2 m.), 300 ft. (91.4 m.) and 500 ft. (152.4 m.) lengths. The EC15-10, EC15-250, EC15-300 and EC15-500 cables are used to connect the blasting machine to the TB12 or TB15 terminal board. The EC15-2 cable is used to connect the energy tester to the blasting machine. Cables of other lengths are available upon request.

Shipping Weight

EC15-2 1 lb. (0.5 kg.)
EC15-10 1 lb. (0.5 kg.)
EC15-250 17 lbs. (7.7 kg.)
EC15-300 21 lbs. (9.5 kg.)
EC15-500 32 lbs. (14.5 kg.)

 

R50 Cable Reel is made of corrosion-resistant lightweight aluminum and is used to carry and transport extension cables up to 500 ft. A shorting socket keeps all circuits shunted until the plug is removed for connection to the blasting machine. The crank handle swings and locks in two positions, for storage and operation.

Shipping Weight: 13 lbs. (6.4 kg.)

 

 

TB15 Terminal Board is a compact, durable, rugged, lightweight printed circuit design with 10 pairs of hookup terminals for up to 10 circuits. A socket is provided for connecting extension cables. The AD Load Plug provides the shunting requirement during connection of the detonators to the terminal board. In addition, the terminal board provides convenient Load Plug storage.

Shipping Weight: 5 lbs. (2.3 kg.)

 

 

BMS10 Blaster's Multimeter Switch is used with an REO BO199.9-1 or BO1999-1 Single Circuit Blaster's Ohmmeter or other single circuit Blaster's Multimeters or Blasting Galvanometers when an REO BO199.9-10 or BO1999-10 Ten Circuit Blaster's Ohmmeter is not available. The BMS10 aids in checking for errors and broken wires in multiple blast circuits. A blasting cable receptacle with an attached screw-on dust cap and two meter terminals provide the necessary connection between the meter and the blasting circuits. The enclosure is a rugged water and corrosion resistant polycarbonate plastic case.

Shipping Weight: 2 lbs. (0.9 kg.)

 

AD5 (BM175 series) and AD6 (BM225 series) Load Plugs are used to test blasting machines. The load plug contains 10 resistors, each equal to the maximum load resistance of the blasting machine.

Shipping Weight: 1 lb. (0.5 kg.)

 

Back to Top

Copyright 1999 - 2001 Research Energy of Ohio, Inc. all rights reserved